Elementi Singoli - Fissatori Esterni

Container for rail external fixator kit

Radiotransparent carbon ring for external fixation

Aluminium ring for external fixation

Threaded rod that allows the connection and reciprocal movement of the circular components.

Threaded rod that allows the connection and reciprocal movement of the circular components.

Rail for stabilization of bone-holding components

Rail for stabilization of bone-holding components with holes that are coplanar with the rail

Fixator capables of stabilizing the torsion forces.

Carbon bars that connect with all radiolucent round clamps

Hemispherical nuts which lock the inclinable rails and the inclinable cylindrical rods in oblique position compared to the ring or half-ring.

M5 nut with flange.

M5 hemispherical nut, Inox

M5 hemispherical nut, Titanium

Inclinable rod for stabilizing bone-holding components

Round washer with 6.5 mm hole in stainless steel.

Round washer with 6.5 mm hole in stainless steel.

Toothed washer for the stabilization of the nails

The rectangular washer is interposed between the wire/pin and the ring plane so as to protect the ring surface.

Hemispherical washer that locks the rails and the cylindrical rods in oblique position compared to the ring or half-ring

Self-centering Washers for Veterinary Orthopedic Surgery

 Radiotransparent Hemispherical Washer 10x15 mm for Veterinary Orthopedic Surgery

Sterilisation case for the components of mini linear radiolucent kit.

Sterilisation case for the components of dynamizable set.

Complete autoclavable container for mini hybrid kit

Complete autoclavable container for maxi hybrid kit

Sterilisation case for the components of midi kit.

Malleable stainless steel rods suitable for obtaining a “sail-shaped” assembly

Cylinder for supporting threaded pins

The spacer allows to tension the wire K applied it to the head of the thread tension.

Clamp extension for dynamizable which allows greater flexibility in pin connection to distance the pin plane from the fixator plane

Dynamizable linear fixator able to moving longitudinally so as to allow compression and distraction of the fracture stumps.

Stabilizing hook used to lock the malleable bar at its ends, connecting it to the linear and circular elements

Hook that can lock nails up to 2.5 mm in diameter

Hook for stabilize the connection bars checking the torque forces.

Universal cardan joint that allows the connection of two levels of fixation to obtain programmed angular movements of the fixator. It is particularly useful to correct angular deformities.

Dual function component for external fixation

Function 1: Post

Function 2: Wire or pin holding clamp

This connector makes it possible to connect dynamizable linear fixators of the uni11 series with all circular elements.

Wire/pin clamp in aluminium alloy compatible with circular components and rails

Aluminum alloy clamp for linear dynamizable fixators and for the tiltable bars

Radiolucent support that forms the clamp polilock together with some hooks.

Cap useful to avoid injury to the patient and to the operator.

Threaded locker for pin for veterinary external fixation 

Stainless steel screw M3 to connect among them the two carbon rods using the round supports.

Perforated screw allows to lock the tensioned K wires to rings.

Dynamometric wire tensioner for the measurement of the tension to which the K-wires are subjected.

Hexagon wrench 3.0 mm with spherical tip

Wrench for hooks used to lock the hook of any type to prevent it from rotating

Socket wrench for tighten the M3 nuts of the radiolucent mini linear fixator Polilock.

Joint makes it possible to obtain transarticular constructs and the connection between two linear elements or between a linear and a circular element.

Hook that can lock nails up to 2.5 mm in diameter

Dado M6 alluminio utilizzato per fissare il morsetto fissafilo e bandierina commerciale.

M6 nut used for Wire/pin clamp and Double-purchase post